Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
post

Looking into the future of components for power electronics

- Advertisement -

Electronics component manufacturing never really took off in India since its entry in India in the 1960s. Even when the Indian electronics and power electronics markets began to show tremendous potential and witness enormous growth, manufacturing was never really seen as the country’s forte. There was never any significant initia­tive like in China and Taiwan, where manufacturing of components for power electronics flourished not only locally but globally as well. Domestic component manufacturers often see government policies as unfavourable, especially with regard to duties on components.

On the other hand, foreign manufacturers stayed away from India and did not think of it as a manufacturing base, citing want of domestic volumes to sustain a profitable manufacturing base and poor infrastructure as the reasons for their lack of interest. Many considered India a market that is good only for trading, something which became more attractive because of the lower­ing of duties.

By Srabani Sen

- Advertisement -

Saturday, September 19, 2009: Over the years, circumstances haven’t changed much. Govern­ment policies more or less are the same as they were five years ago. India’s infrastructure is still inadequate. The component base for power electronics is still not adequate to sustain manufacturing. With virtually no domestic produc­tion of power electronic compo­nents, manufacturers of UPS and inverters like Su-Kam, Microtek, Numeric, Luminous, Servotech, Convergence, Protronics and many others are forced to import compo­nents from countries like China and Taiwan, which has become a major financial burden.

Components for UPS, inverters

There are many different power circuit topologies and control applications used in inverters and UPS. Different designs address various features and employ different components for them. The typical components em­ployed in a UPS or inverter are rectifi­ers, converters, controllers, capacitors and inductors. The designs may even include transformers, connectors and resistors.

This indicates that the growth of the components market is com­mensurate with the growth of the UPS and inverter market. Therefore, irrespective of all the hindrances, manufacturing of these components should take place in India and can indeed become a thriving industry, predict industry analysts.

Ample apportunity, say buyers

Due to lack of availability of com­ponents in the domestic market, it becomes difficult for manufactures of power devices to source them. They feel that it is difficult to change the mindset of the local players who are afraid to invest in the components business. The manufacturers want buyers to guarantee that whatever they manufacture, the latter will pur­chase the entire lot. Buyers, therefore, opine that component makers should realise that no business is without risk. Since there is ample opportunity for component manufacturers in In­dia, this risk would be worth taking, say manufacturers of UPS and invert-ers—the buyers of components.

Convergence Power Systems, a manufacturer of UPS and inverters, imports 40 per cent of its compo­nents from Taiwan and China. “These are basically IGBTs, metal oxide semiconductor field effect transistors (MOSFET), ICs and liquid crystal displays (LCDs), which are not made extensively in India. Whatever qual­ity products are available in India, we purchase from here itself. We source transformers, enclosures, DC capacitors, wires and cables only from India,” says Srikumar, director of marketing, Convergence. “The components’ technical and com­mercial viability matters when the purchasing decision is being taken, not their place of origin. We go for sound quality and good price. There is no common platform where one can get to know about the components produced in India. However, through our network, we manage to find the concerned vendors,” he adds.

Srikumar thinks that Indian compo­nents are being upgraded to keep pace with time and international standards of quality. “Their quality is good but innovation and variety are missing,” he says. According to him, “The Indian component market is gaining strength and more people are manufacturing components in India now. We envis­age a 20 per cent growth in this market in the next five years. Earlier, people weren’t aware about what kind of ma­chinery and facilities were needed for manufacturing components. Now, they are more educated on the matter and are taking initiative. Surely, more and more people will join the bandwagon,” he comments.

Protonics Systems India Pvt Ltd, another manufacturer of power elec­tronics devices, procures MOSFETs, IGBTs, ICs and microcontrollers from Japan, Taiwan, Korea, China, Hong­kong, Singapore as well as India. “About 30 per cent of our components are imported. The rest are locally made. We buy metal parts, plastic parts, PCBs, transformers, wires and cables from the Indian makers,” says Anil Bhushan, director, Protronics.

While Bhushan is of the opinion that the quality of the Indian compo­nents is at par with the international ones, “the local components industry is still suffering as very limited items are available here, due to which we are forced to import. A broader range of components should be produced,” he feels. However, Bhushan feels that there is enormous market potential for India-made components and in the coming years the Indian component market can do good as the UPS and inverter market is flourishing.

Servotech Power Systems Pvt Ltd imports 90 per cent of its semiconduc­tors from southeast Asia. “We don’t import directly—we buy from the Indian importers,” says Raman Bhatia, managing director, Servotech. “We have no choice as more than 70 per cent of the components are not being produced in India. We do buy the ones that are available, for instance, resis­tors, buzzers, capacitors and wires.”

Bhatia feels that the Indian compo­nent market is sluggish owing to the power crisis, due to which, deliver­ies are hardly ever punctual. Other than that, Bhatia admits to facing no major problems while sourcing its components from the local market. “Though manufactured on a small scale, Indian components are as good as the international ones. However, they turn out to be costlier than the latter as they are produced in modest quantities. The Indian component market is growing with time and that growth will be directly proportional to the growth of the power electronics industry. Manufacturers will slowly start manufacturing high end compo­nents,” Bhatia adds.

A SILVER LINING

Despite the limitations of the component manufacturing market, there are some components, especially those made locally for UPS and inverters, which are prospering. These include resistors, transformers, capacitors and PCBs, amongst others.

Resistors: The growth of power electronics in the country has created immense scope for the resistor industry in India, which has been demonstrating constant growth in the last few years. According to Girish Nangia of Stead Resistors, “The demand for resistors has amplified because of constant innovation in the electronics industry and a surge in the requirement of existing products.”  Although the presence of global players in the local market has contributed to the enhancement of the quality level of India-made resistors, leading to improved quality and productivity, the former are giving stiff competition to the local manufacturers as well. “Their low costs, swift deliv­ery and consistent quality are making it difficult for local players to survive in the industry,” says Pradeep Khadilkar, director, Cermet Resistronics, a manufacturer of resistors.

Another factor that is holding local players back from venturing into this field is the zero per cent custom duty on imports, which has resulted in drastic reduction of product prices. Nevertheless, those involved in niche resistor manufacturing are not impacted by the already established foreign players as customers’ requirements vary.

“The only way to survive in this competitive environment is to innovate and provide tailor-made solutions to customers rather than try to compete on the bulk supply price front,” advises Khadilkar.

PCBs: Advance Technologies manufactures PCBs and membrane key boards. “The demand for PCBs is quite strong and the market is growing in India,” says Amit Agar­wal, director, Advance Technologies. “Though manufacturers of UPS and inverters prefer imported components, they go for domestic PCBs as India made PCBs are reliable and quality controlled. Indian PCBs boast of approximately 70 per cent market share. ”

“Many reputed players in the UPS and inverter sector use their own technology, for which they prefer locally made PCBs. Manufacturers in India are producing a wide range of PCBs including single side, double side, flexible, rigid flexible and multilayer. However, the price competition is quite sharp. The Chinese made PCBs are cheaper and we have to match them on that front but as long as the dollar price is high, we get benefited,” says Agarwal.

The import of cheaper and qualitatively better raw materials is restricting the growth of PCB manufacturing in India. Many local manufacturers are hesitant to enter the field as the scenario here is not conducive for manufacturing. Agarwal also thinks that technology wise, PCB manufacturers still have a long way to go in order to compete with the imported ones. “Indian PCB manufacturers are concentrating on innovation to counter the competition from foreign players,” adds Agarwal.

Transformers: Sharma Electronics, and ISO 9001-2008 certified firm, has been manu­facturing transformers for inverters, UPS, panels, etc since 1996. Its buyers’ list comprises established names like Kevin Power Solutions, SS Enterprises, Powersys Incorporation amongst others. “The vast development in technology has made the manufacturing proc­ess of transformers easier for manufacturers. The industry has adapted itself according to the latest technologies,” says Ramesh Sharma, director, Sharma Electronics.

“With the burgeoning need for UPS and inverters, the demand for transformers, too, is expanding. With the foray of various manufacturers into the market, competition is growing tougher and to succeed, each and every manufacturer is customising transformers for power devices,” says Sharma.

According to Sharma, the Indian manufacturers face no competition from Chinese and Taiwanese transformers as the latter are inferior in quality. “We design transformers as per customer specifications, develop them to their satisfac­tion and deliver on the scheduled time. We believe in ‘fit it and forget it’,” adds Sharma.

Huge demand, say importers

The sector also harbours a strong pres­ence of importers, who import compo­nents for UPS, inverters and batteries, mostly from China and Taiwan and distribute them to manufacturers of power electronic devices. These importers also feel that there is huge demand for components in the power electronics sector but only a handful of manufacturers in the domestic sector. They, therefore, turn towards foreign countries for importing components to meet the demand in the domestic power electronics sector.

One such importer and distribu­tor is Aaj Tech Trading Corp, which imports connectors from China and Taiwan that are used in PCBs of invert­ers. It sells to inverter and PCB manu­facturers. “There is a huge demand for connectors and it is increasing every year. Since the manufacturing envi­ronment of PCBs is good, any amount of connectors imported are sold off. The market is wide and the business is flourishing. You just need the capi­tal to invest,” says Shivani Agarwal, director, Aaj Tech Trading. Shivani opines that the local manufacturers do not suffer from components being imported as it is a parallel market and there are buyers for both.

Formax Electronics Pvt Ltd imports German company Insenon-made insu­lated gate bipolar transistors (IGBTs) from Singapore. Says its managing director, Manoj Saini, “Manufacturers of UPS and inverters usually prefer imported components as they feel that the R&D of local manufacturers is inferior. In addition to R&D, domestic manufacturers need to invest in better infrastructure. Also, the government needs to extend support to them.

“Nevertheless, Saini is optimistic about manufacturing in India. “There are several advantages in sourcing compo­nents from the Indian soil. There will be no delivery problems, manufactur­ers will get immediate feedback from local customers and buyers can directly approach manufacturers regarding defective pieces or other problems.” To combat the stiff price competition, Saini suggests that manufacturers come up with innovative designs, use modern machines and new techniques and concentrate on quality.

Perfect Radios director Sunil Makkar, however, shares a differ­ent view. “Manufacturers are either importing finished products or fin­ished component kits from China and Taiwan,” says Makkar. Perfect Radios imports integrated circuits (ICs), capacitors, resistors and many other components for power electronic devices. “The need for components is, therefore, decreasing. We have started feeling the pinch and are di­versifying into other areas. Now, we are importing components for medical equipment and other industrial manu­facturing equipment,” adds he.

Makkar feels that if the government doesn’t wake up to the problems of component manufacturers immedi­ately, then many will be forced to shut shop. He suggests that the government levy duties on imported finished goods like UPS and inverters or finished com­ponent kits. “Then only can the local manufacturers survive,” he stresses. Makkar also believes that the price gap between the locally made and the imported components is strikingly vast. “The imported ones are much cheaper. Indian manufacturers cannot afford to lower costs as their manufacturing cost is quite high,” he adds. Promila Joshi of Airmaster Rectifiers also opines that traders are bearing the brunt of the shrinking market. “Manufacturers of UPS and inverters are directly ap­proaching local manufactures for their bulk component needs, ignoring trad­ers like us. This is obviously impeding our growth,” she says. Airmaster Recti­fiers buys semiconductor devices from local manufacturers as well as imports them from Taiwan and China.

Many impediments, say manufacturers

Domestic manufacturers,however, have a different take on the matter. “Many factors collectively serve as an impedi­ment for the manufacturing of compo­nents for power devices in India,” says Pradeep Khadilkar, director, Cermet Resistronics Pvt Ltd, a manufacturer of resistors. “The qualitatively better raw materials imported from other countries are much cheaper than the domestic ones and that is restricting the growth of indigenously produced components. Many local manufacturers are hesitat­ing to enter this sector as the situation here is not conducive for manufacturing components,” he adds.

Amit Agarwal, proprietor, Advance Technologies, points out, “With the demand for UPS and inverters grow­ing, it has become even more exigent for power electronic players to source components from the domestic mar­ket. Presently, almost 70 per cent of the components that are used by manufacturers are being imported and thus, the advantage India has of low labour costs gets nullified by the duty charges they have to pay for import­ing components. We also have a lot of catching up to do when it comes to domestic component manufactur­ing for power electronics, in terms of technology and infrastructure.”

Labour is a vital aspect of com­ponent manufacturing. “If you want to make about a million defect free circuit boards, it would require a la­bour content of 2 per cent. However, if you want to make a million defect free pieces, then you have to employ adequate machines (SMT assemble line), production technologies and methods and then you calculate the manpower per unit of the overall cost, it will be as low as 2 per cent. Now, if you make a profit of 2 per cent, then you are definitely making losses be­cause our operating cost is very high,” states Bharat Pandey, director, Parma & Parma Pvt Ltd.

Novoflex makes a number of com­ponents for power electronics, includ­ing for UPS and inverters. Its director, Dinesh Kumar Banka, sees significant advantages in manufacturing compo­nents in India. “We can hire qualified, efficient and productive labour at a reasonable cost. Moreover, there is a vast market for selling the products manufactured to numerous industries located far and near the manufactur­ing base.” Novoflex manufactures products like strain relief cord bush­ings, nylon printed circuit board (PCB) spacers, flexiguard grommet rings, P-clips and twist clips amongst oth­ers. “All these components are being manufactured in India and they are all doing well,” adds Banka. He attributes the company’s success to innovative products, timely delivery, competitive prices and easy availability.

Says Pandey, “China is a challenge for us. The Chinese style of doing business is different from ours. They produce in bulk and sell at low costs because they have the market all over the world so they can do business in low profit, whereas we believe in regular and as-per-demand production with a high focus on quality and we have only domestic market to cater. Our prices are higher in comparison to the Chinese products.”

Succour suggested

The buyers of components used in UPS and inverters and the importers of components, however, suggest that component manufacturers in India should invest in manufacturing for domestic business as well as export. Moreover, hardware manufacturers need to innovate in order to cater to emerging countries, they state. While Srikumar says that the manufacturers should try to produce components that are as good as the imported ones, Bhatia opines that they should pay heed to R&D. “Indian com­ponent manufacturers should have quality and should be competitively priced. They should try to address the requirements of the world market as well. If they just cater to India, there are chances of running into losses. Also, indigenous manufactur­ers should stretch their horizons by making more kinds and varieties of components so that the industry has to import less,” says Srikumar According to Bhatia, “Some levels of corruption is also involved—the values of compo­nents displayed are different than the ones that are exhibited during testing procedures. Quality needs to be im­proved to curb such deviations.”

Soul searching needed

Indian manufacturers need to know that owing to the massive demand for UPS and inverters, now is the opportune time to venture into the components business. They need not be intimated by the hurdles and chal­lenges and must manufacture more, in terms of quantity as well as variety so that buyers don’t look towards other countries for their sourching needs.

Also, the buyers of components for UPS and inverters should be aware of the fact that some of the Indian com­ponents are doing well and are indeed better, in terms of design and quality that their imported counterparts. Most importantly, the Indian ones can be customised as per customer require­ments. If the manufacturers and buyers of components make an effort to com­prehend each other’s needs and cater to each other via supply and demand, there will be no stopping the Indian market from scaling great heights. The prospect of investing in component manufacturing is formidable, no doubt, but if both the government and the industry work in tandem to formulate investor friendly policies, India can be a force to reckon with in the global electronics manufacturing arena.

Electronics Bazaar, South Asia’s No.1 Electronics B2B magazine

- Advertisement -

Most Popular Articles

Optical Fibre Connecticity-Ladakh

Indian Army Installs Optical Fiber Connectivity In Siachen And Daulat Beg Oldi 

0
Ongoing infrastructure projects, such as the new road to Daulat Beg Oldie (DBO), are set to significantly improve logistical support for troops deployed in...

Lumax Auto Buys 60% Of Greenfuel Energy For Rs 153.09 Cr

0
This collaboration with Greenfuel enables LATL to expand and diversify its range of solutions for automotive OEMs in India. Lumax Auto Technologies has completed the...

River Launches Updated Indie Electric Scooter With Chain Drive And New Colors

0
The revamped Indie now comes with a single-speed gearbox and a chain drive, enhancing both durability and cost-effectiveness. It is also available in two...

Ola Unveils S1 Z Electric Scooter Priced At Rs 59,999

0
The S1 Z operates with two detachable 1.5kWh battery packs and features 14-inch wheels. Ola Electric has recently expanded its lineup of electric scooters by...

Mahindra Unveils Electric BE 6e And XEV 9e Models

0
Deliveries are scheduled to start in late February or early March 2025, following a phased market introduction that begins in January 2025. Both models...
S.K. Yadav of RIGOL Technologies

“Our India Business Is $2 Million, With A Goal To Reach $6 Million” –...

0
In a chat with EFY’s Nitisha, S.K. Yadav of RIGOL Technologies highlights the company’s journey in India, shedding light on its growth prospects and...
Bejoy George, Managing Director- Chipmax Designs Private Limited,

“We Are Advancing R&D Projects To Develop Modular Assembly Lines With Adaptive Robotics” –...

0
How do you envision technological progressions influencing the future of manufacturing operations? Get informed from Electronics for You’s Akanksha while in dialogue with Bejoy...
Srinivas Parikshith, Co-founder of Auckam Technologies

“We Anticipate Turnover Reaching 40 Million Rupees Next Year With The New Product Line”...

0
Discussing the electronics manufacturing sector, Srinivas Parikshith, Co-founder of Auckam Technologies, talked to EFY’s Nitisha Dubey about their expansion plans to set up a...

“We Bring Intelligence Early On Into The Design Cycle” – Michel Van Cotthem VP...

0
With a solution embedding intelligence early in the design-to-source lifecycle, Supplyframe aims to leverage India’s electronics manufacturing boom. At IEW 2024, Michel Van Cotthem...
Vijai Karthick Selvam, Director of Teqtis

“We Do Everything From The Initial Concept To The Final Box Build” – Vijai...

0
Why are testing and R&D essential to combat printed circuit board manufacturing challenges? Speaking to EFY's Nitisha Dubey, Vijai Karthick Selvam, Director of Teqtis,...

HKTDC Electronics Fair Sparks Innovation, 60,000+ Participants!

0
Showcasing cutting-edge tech, global innovation, and booming markets for the future of electronics, HKTDC’s Hong Kong Electronics Fair and electronicAsia drew 60,000+ professionals. Last month,...
Applied Materials Representational Image

Applied Materials Selects Six Startups For Deep-Tech Accelerator Programme

0
The selected deep-tech startups will be evaluated for investment by Applied Ventures and potential collaboration opportunities with Applied Materials. In collaboration with the company's India...

Space tech Startup Akash Secures $68M CHIPS Funding

0
Eyeing to power into AI, EVs, and more high-tech industries, Akash Systems lands $68 million CHIPS grant to boost its cooling tech facility, generating...

Wireless Light-Based Communication With Velmenni’s Technology

0
Velmenni is at the forefront of wireless communication innovation with its pioneering light-based technologies, Li-Fi and LC Link. Founded by Deepak Solanki in October 2014...

Harnessing AI Technology For Efficient Pest Management

0
AI-Genix, an agri-tech startup, is transforming pest management for farmers through advanced AI-enabled systems that precisely target harmful pests. In an industry where pesticides and...

Industry's Buzz

Optical Fibre Connecticity-Ladakh

Indian Army Installs Optical Fiber Connectivity In Siachen And Daulat Beg Oldi 

0
Ongoing infrastructure projects, such as the new road to Daulat Beg Oldie (DBO), are set to significantly improve logistical support for troops deployed in...

Lumax Auto Buys 60% Of Greenfuel Energy For Rs 153.09 Cr

0
This collaboration with Greenfuel enables LATL to expand and diversify its range of solutions for automotive OEMs in India. Lumax Auto Technologies has completed the...

River Launches Updated Indie Electric Scooter With Chain Drive And New Colors

0
The revamped Indie now comes with a single-speed gearbox and a chain drive, enhancing both durability and cost-effectiveness. It is also available in two...

Ola Unveils S1 Z Electric Scooter Priced At Rs 59,999

0
The S1 Z operates with two detachable 1.5kWh battery packs and features 14-inch wheels. Ola Electric has recently expanded its lineup of electric scooters by...

Mahindra Unveils Electric BE 6e And XEV 9e Models

0
Deliveries are scheduled to start in late February or early March 2025, following a phased market introduction that begins in January 2025. Both models...

Learn From Leaders

S.K. Yadav of RIGOL Technologies

“Our India Business Is $2 Million, With A Goal To Reach $6 Million” –...

0
In a chat with EFY’s Nitisha, S.K. Yadav of RIGOL Technologies highlights the company’s journey in India, shedding light on its growth prospects and...
Bejoy George, Managing Director- Chipmax Designs Private Limited,

“We Are Advancing R&D Projects To Develop Modular Assembly Lines With Adaptive Robotics” –...

0
How do you envision technological progressions influencing the future of manufacturing operations? Get informed from Electronics for You’s Akanksha while in dialogue with Bejoy...
Srinivas Parikshith, Co-founder of Auckam Technologies

“We Anticipate Turnover Reaching 40 Million Rupees Next Year With The New Product Line”...

0
Discussing the electronics manufacturing sector, Srinivas Parikshith, Co-founder of Auckam Technologies, talked to EFY’s Nitisha Dubey about their expansion plans to set up a...

“We Bring Intelligence Early On Into The Design Cycle” – Michel Van Cotthem VP...

0
With a solution embedding intelligence early in the design-to-source lifecycle, Supplyframe aims to leverage India’s electronics manufacturing boom. At IEW 2024, Michel Van Cotthem...
Vijai Karthick Selvam, Director of Teqtis

“We Do Everything From The Initial Concept To The Final Box Build” – Vijai...

0
Why are testing and R&D essential to combat printed circuit board manufacturing challenges? Speaking to EFY's Nitisha Dubey, Vijai Karthick Selvam, Director of Teqtis,...

Startups

HKTDC Electronics Fair Sparks Innovation, 60,000+ Participants!

0
Showcasing cutting-edge tech, global innovation, and booming markets for the future of electronics, HKTDC’s Hong Kong Electronics Fair and electronicAsia drew 60,000+ professionals. Last month,...
Applied Materials Representational Image

Applied Materials Selects Six Startups For Deep-Tech Accelerator Programme

0
The selected deep-tech startups will be evaluated for investment by Applied Ventures and potential collaboration opportunities with Applied Materials. In collaboration with the company's India...

Space tech Startup Akash Secures $68M CHIPS Funding

0
Eyeing to power into AI, EVs, and more high-tech industries, Akash Systems lands $68 million CHIPS grant to boost its cooling tech facility, generating...

Wireless Light-Based Communication With Velmenni’s Technology

0
Velmenni is at the forefront of wireless communication innovation with its pioneering light-based technologies, Li-Fi and LC Link. Founded by Deepak Solanki in October 2014...

Harnessing AI Technology For Efficient Pest Management

0
AI-Genix, an agri-tech startup, is transforming pest management for farmers through advanced AI-enabled systems that precisely target harmful pests. In an industry where pesticides and...