The Latest Products Available In The SMT Dispensing And Coating Market

- Advertisement -

SMT dispensing products have the potential to process a vast variety of chemistries that comprise viscous or abrasive materials, irrespective of slight changes in these materials due  to atmospheric conditions. These dispensing, coating and curing systems are ideal for  selective coating, potting, beading, and meter-mix dispensing applications. Apart from that, they are also suitable for batch or inline operations, and are designed for high accuracy and demanding applications.

PCBs require a range of equipment for diverse procedures such as dispensing, coating and curing. All these processes go on simultaneously, especially in batch operations for bulk manufacturing. Technology applications these days require top-notch coating and dispensing products that ensure high accuracy and repeatability.

Some of the latest SMT dispensing and coating machines launched by leading companies are listed below.

Model: Camalot Prodigy; Manufacturer: ITW EAE
Speed, stability, and precision are hallmarks of the Camalot Prodigy automated dispensing systems from ITW EAE, USA. Innovative gantry designs in smaller, more compact footprints enable rapid acceleration for faster throughput, while at the same time providing stability that enables precision for applications ranging from solder paste and under-fill to adhesive dispensing and advanced ‘jetting’ techniques. Camalot systems offer two types of auger pumps, both controlled with a precise servo drive system. The 635SD series is typically used for finer feature dots and lines of highly viscose materials. The 680SD pumps deliver high flow rates and also incorporate a patented positive shutoff that eliminates dripping of lower viscosity materials. For highly abrasive materials, both pump systems offer  more wear-resistant carbide auger screws.

- Advertisement -

Key features:

  • High-speed and accurate dispensing
  • Large board capability
  • Controlled heating for repeatable processes
  • Plug-and-play architecture
  • Independent dual head
  • Synchronous dual head mode
  • Automatic vision alignment
  • Pipeline conveyor mode
  • Benchmark user interface with FlipChip Calculator software

Contact: Leaptech Corporation, www.leaptech.in

Model: MyC50; Manufacturer: Mycronic
The MYC50 in-line conformal coating system in the MYSmart series from Mycronic combines high accuracy edge control with advanced feedback systems. A wide range of process parameters can be monitored enabling high quality output. Options such as fan width control, non-heated circulation systems, heated circulation systems and barcode readers are a few examples of the process control enhancements that are possible. The MYC50 helps to prevent material waste while ensuring highly controlled coating film thickness, coating area and process speed.

Key features:

  • Fast and stable operation
  • Spray patterns can be changed on-the-fly, significantly improving process efficiency
  • Flexible multi-axis control enables precise coating of complex PCBs
  • Powerful process controls result in precise coating that consistently meets strict quality guidelines
  • Barcode reader enables automatic program loading and traceability

Contact: TransTechnology, www.trans-tec.com

Model: Panorama; Manufacturer: Nordson ASY MTEK
The Panorama solutions provide a balance of equipment and process control for optimal efficiency in automated conformal coating. They are modular so that configurations are flexible and equipment can be easily added when needed. Process control and automation work together to create efficiency.

They are available in three types—Panorama S-Line, Panorama C-Line and Panorama R-Line.

Key features:

  • A full range of equipment options
  • Minimal operator interaction
  • Closed-loop controls, parameter limits and inspection across the line
  • Process data for improved productivity
  • Stability and consistency at every step

Contact: www.nordson.com

Model: MYD10/ MYD50; Manufacturer: Mycronic
The MYSmart series from Mycronic offers a wide range of in-line dispensing solutions together with a comprehensive portfolio of valve technologies. The compact MYD10 in this series enables highly advanced non-contact jetting for enhanced dispensing uniformity, throughput and material utilisation. For higher-precision applications such as complex chip packaging, the powerful MYD50 system further boosts productivity with linear motor  motion control. The MYSmart in-line dispensing solutions make it possible to handle a vast array of current and emerging products, assembly fluids and package types.

Key features:

  • Unmatched production value
  • Non-contact jetting technology
  • Semi- or full automation
  • Low maintenance and long service life
  • High-precision dispensing volume control

Contact: TransTechnology, www.trans-tec.com

Model: PrecisionCoat V with AQC; Manufacturer: Specialty Coating Systems
The PrecisionCoat V selective conformal coating and dispensing system is fully programmable. It is a multipurpose system that offers good programming for efficiency in automated material applications. It allows users to precisely apply a wide range of  materials, including 100 per cent solids, as well as solvent based and water based coatings.

 

Key features:

  • High accuracy and repeatability
  • Automatic quick change (AQC) allows for five separate tools within a single machine
  • Five axes programmable tilt and rotate
  • Windows based software control with user-friendly interface
  • Ease of programming
  • SCS designed valves
  • Safety interlocks
  • Equipped with a range of optional features, such as fiducial recognition, needle calibration, laser-height mapping, etc

Contact: www.scscoatings.com
Indian distributor: iNETest Technologies India Pvt Ltd

Model: Vortik; Manufacturer: Nordson ASY MTEK
The Vortik series of pumps incorporates progressive cavity pump technology in a fully integrated dispensing system solution, complete with process controls for mass flow
control and a patent-pending Automated Ratio Control (ARC) system for mixing two-component fluids. Three pump families in the Vortik series—VPs, VPm, and VPg— are based upon general volume ranges, and each includes models for dispensing one-component (1K) and twocomponent (2K) fluids. In addition, changes in speed or volumetric output are logged, providing good traceability.Key features:

  • VPs pumps come with a flow rate of 0.2 microlitres per second, and delivers the smallest depositions of 1- and 2-component fluids
  • The VPm and VPg pumps dispense volumes from 2 to 400 microlitres/second for  applications in electronics package assembly and automotive electronics
  • Dispensing is faster during production because no fluid refill cycle is needed

Contact: www.nordson.com

 

- Advertisement -

Most Popular Articles

Infineon, Stellantis Partner To Advance Next-Gen Vehicle Power

0
With a dedicated Joint Power Lab and secured supply agreements, the partnership is set to drive transformative advancements in EV performance, cost-effectiveness, and the...

Audi Launches New EV Brand In China, Drops 4-Ring Logo

0
On Thursday, Audi introduced a new electric vehicle brand in China, branding the cars solely with the name 'AUDI' instead of its traditional four-ring...
IIT Bhubaneswar

IIT Bhubaneswar Partners MOSart Labs To Boost Engineering Skills In Chip Industry

0
The aim is to help students with essential skills in areas such as very-large-scale integration (VLSI), semiconductor technology, analog and digital design, validation, and...
Jaguar concept EV

JLR Highlights Its Biggest Reinvention With The Concept Car Jaguar Design Vision

0
The four-door GT is anticipated to be Jaguar's most powerful model to date. Its targeted range is approximately 430 miles (700 kilometers), and its...

ISE Labs Expands With New OSAT Facility In Mexico

0
Turbocharging its growth in North America’s tech hub, ISE Labs is set to build an OSAT semiconductor facility in Jalisco, Mexico, eyeing to create...

“Adoption Of IoT-Enabled SMT Machines Is Still In Early Phases” – Pradeep Tandon, Director...

0
While electronics are becoming smarter through the Internet of Things, is electronics manufacturing following suit? Pradeep Tandon, Director for India, Middle East, and SAARC...
Dr Yashodhan P. Gokhale, Vice President for Battery Technology, JSW Energy

Charge Forward: High-Voltage Batteries And MSMEs Can Fuel India’s EV Revolution

0
A nuanced explanation of low- and high-voltage EV batteries by Dr Gokhale, Vice President for Battery Technology at JSW Energy, illuminates their advancements and...
Sanjay Gupta, CDO & Global Head of Engineering, L&T Semiconductor Technologies

Can MSMEs Contribute And Profit From The Semicon Boom?

0
Semiconductor manufacturing often requires significant investment, typically feasible only for governments or large corporations. But are there opportunities for MSMEs as well? We spoke...
N.P. Ramesh, COO and Co-Founder, Orb Energy

“We Ensured Customers’ Monthly EMI Would Be Equal To Or Less Than Their Electricity...

0
In a conversation with Nitisha from EFY, N.P. Ramesh of Orb Energy outlines the early financing challenges customers faced. He explains how Orb Energy’s...

“Government Policy Should Equitably Address All Electric Vehicles: Extend Subsidies To Retrofits Or Remove...

0
Aryaman Raghuvanshi from EFY engages with Pramod Narendra, Head of Brand Management and Retail Network at Starya Mobility, to explore the overlooked potential of...

Wireless Light-Based Communication With Velmenni’s Technology

0
Velmenni is at the forefront of wireless communication innovation with its pioneering light-based technologies, Li-Fi and LC Link. Founded by Deepak Solanki in October 2014...

Harnessing AI Technology For Efficient Pest Management

0
AI-Genix, an agri-tech startup, is transforming pest management for farmers through advanced AI-enabled systems that precisely target harmful pests. In an industry where pesticides and...

One Charger To Charge All Your Devices

0
Now, there is no need to carry different chargers for different products. This Bhubaneswar startup has launched a universal 65W charger using GaN technology...

Karnataka Government Initiative Promises ₹5M To Tech Startups

0
Boosting innovation and entrepreneurship across the state’s vibrant ecosystem, Karnataka launched Elevate 2024 and KAN, offering grants up to ₹5 million for startups. On Tuesday,...

CastNX Tech Startup Secures ₹232M For Power Electronics Growth

0
Eyeing to boost R&D and produce 100,000 variable frequency drives by 2026, Indian power electronics startup CastNX has secured ₹232.2 million from Plutus Investments. CastNX...

Industry's Buzz

Learn From Leaders

Startups