Thermal management for LED bulbs: Technology is evolving

- Advertisement -

 

Position for thermal interface materials (Courtesy: https://consumer.dow.com)

The quality and the reliability of the light of an LED are both temperature-dependent. This makes thermal management critical to maximise an LED’s output. Since LEDs are semiconductors, they emit a substantial amount of heat in a very small area. That’s why the most appropriate thermal management solutions should be considered to dissipate the highly concentrated waste heat.

By Deepshikha Shukla

- Advertisement -

Heat adversely affects an LED by reducing both its efficiency and its life expectancy. By reducing the junction temperature by just a few degrees, the lifetime of an LED can be increased by thousands of hours. Moreover, reducing the temperature of the LED’s surrounding environment will also lower the junction temperature and hence extend the useful life of the LED.

LED lighting is a greener lighting solution, with advantages that include lower power consumption, longer lifetime, compactness and no use of mercury. As the LED industry shifts to higher brightness LEDs and higher density LED arrays, more effective thermal management solutions are required to ensure the operating temperature of the LED junction is low. The shift in the LED light’s wavelength with a rise in temperature is an important concern for spectrum sensitive products.

High-intensity applications such as sports venues, street lamps, industrial and office lighting will lead to increasingly compact LED designs that deliver more lumens, draw more power and, consequently, have to manage heat more efficiently than ever before.

The role of thermal management in improving LED efficiency
Thermal management materials are designed to dissipate heat away from critical areas. They can be used beneath LEDs as an interface between the PCB and the outer casing, conducting the heat away, both above and below the PCB surface. The method chosen will depend upon the design of the assembly. Thermal management materials can also be used to encapsulate associated electronic circuits such as LED drivers, improving the efficiency of the LED unit as a whole. This can help distribute the heat in LED arrays to reduce the temperature at the LED junctions.

Products range from thermally conductive encapsulation resins, offering both heat dissipation and environmental protection, to thermal interface materials used to improve the efficiency of heat conduction at the LED junction. Such compounds are designed to fill the gap between the device and the heat-sink, and thus reduce the thermal resistance at the boundary between the two. Conductive materials such as copper, as well as more effective thermal adhesives and grease, eliminate air pockets that might otherwise impair heat transfer between a heat-sink and a semiconductor material.

Heat pipes transfer heat from the LED to a remote sink
(Courtesy: https://www.1-act.com)

The design of an LED array will also dictate which thermal interface material is chosen. For example, if it is a large array, across which temperature fluctuations are likely, it may be beneficial to use a material that is not subject to movement during thermal cycling. A surface curing thermal paste or one of the latest phase change materials would be ideal choices for these larger LED assemblies.

An encapsulated PCB is also protected from adverse environmental influences such as mechanical shock or high humidity. A thermally conductive ‘room temperature vulcanising’ material (RTV) would be the appropriate choice for both adhesive strength and thermal management. Encapsulation resins provide high levels of protection against adverse environmental factors as well as total heat dissipation. They also provide structural stability and flame retardancy. These heat-sinks are better able to dissipate excess heat when they include fins, which increase the surface area.

Heat-sink technologies
Attaching a heat-sink directly to an LED light casing is ineffective because the casing is not the primary cause of excess heat build-up. Attaching the heat-sink directly to a circuit board also removes some, but not all of the excess heat. Attaching the heat-sink directly to the LED is the best option.

LED lighting includes a circuit board and the LED, with the latter being encased in a lamp. The plastic for LED housings must have the capability to dissipate the heat generated by the LED. It must also provide high mechanical integrity as well as comply with the anti-flammability requirements stipulated for IEC and UL safety standards.

Heat pipe embedded metal core PCBs efficiently spread heat from LED devices, providing a reduction in thermal resistance as compared to pure aluminium PCBs. Integrating heat pipes, high conductivity plates, or vapour chambers with the heat-sink can reduce the LED temperature, and allow heat-sinks to handle higher heat fluxes. The number, shape, size and location of heat pipes would be specific to the design.

The remote sink solution has two heat pipes, one in direct contact with the LED device at one end, which serves as the evaporator. At the other end, the heat pipe is connected to the heat-sink, the condenser. These heat pipes are in direct contact with both the LED at the bottom and heat dissipating fins at the top. A wall or other enclosure can be placed in between the LED and the heat-sink to separate the two.

Heat pipes have an effective thermal conductivity range of 10,000 to 100,000W/m K, compared to aluminium’s thermal conductivity of about 180W/m K. So, the embedded heat pipes can be used to improve the performance of aluminium heat-sinks. The heat pipes can spread the heat throughout the heat-sink due to their highly effective conductivity. This reduces the thermal gradient and subsequently reduces the maximum temperature at the LED source.

High conductivity heat-sinks can also improve the size, weight and power of the LED fixture compared to standard heat-sinks. Embedding heat pipes in a high conductivity sink can increase the thermal conductivity, providing an opportunity to reduce the heat-sink plate thickness and fin area. This can be implemented in a variety of LED applications including large arrays and outdoor lighting.

The longer the heat-sink, the higher the heat dissipation (Courtesy: https://www.1-act.com)

Testing and analysis have confirmed that the performance can be further improved with longer heat pipes. The improvement in thermal resistance with heat pipes increases approximately linearly with an increase in the length of the heat-sink. The benefit will be more noticeable in natural convection heat-sinks as the fan operation plays a major role in forced convection performance.

Technologies developed for thermal management in LEDs
Flexible graphite is being used extensively to remove heat from LED circuit boards, drivers, and other ‘smart lighting’ components, and will play a leading role in the thermal management of the next generation of LED luminaires.

Flexible graphite’s key properties include high in-plane thermal conductivity, low thermal contact resistance, being lightweight, flexible, compressibility, cost-effectiveness, infinite duty life, and the sustainable cradle with a unique structure and properties. Flexible graphite can be used as a heat spreader, heat shield or thermal interface material.

Fischer Elektronik’s new FSF 15P and FSF 20P phase change materials are available as sheets or rolls, and can be customised to flow at a phase change temperature between 52°C and 48°C, respectively.

The MechaTronix CoolStar series of designer LED coolers covers the whole range of cooling capacities from 1000 lumens all the way up to 6000 lumens, which positions them in the spotlight, downlight and luminaires space.

The longer the heat-sink, the higher the heat dissipation (Courtesy: https://www.1-act.com)

Electrical isolation can be achieved using materials that are thermally insulating, such as with FR4 boards. Vapour chambers are used to spread the high input heat flux over the entire surface of the vapour chamber.

GlacialTech has released its new 250W heat-sink for outdoor floodlights and for single COB or multi-chip LEDs. The Igloo SS250 features an efficient heat-sink with heat pipe designs for single COB and multi-chip LEDs to speed up heat dissipation.

The future
Recent trends in the LED industry include high power LED packages, novel architectural form factors, as well as smart and connected lighting. All these trends have one thing in common—more electrical power being packaged within increasingly slim and lightweight form factors. The resulting increase in power density and the inclusion of temperature-sensitive electronics drive the need for innovative thermal management solutions to ensure maximum performance and long life.

Systems have been designed to effectively remove heat and improve the longevity of LED system components, as well as to reduce maintenance and warranty costs. Materials and processes are evolving to meet the thermal management challenges of the next generation of LED luminaires.

- Advertisement -

Most Popular Articles

Infineon, Stellantis Partner To Advance Next-Gen Vehicle Power

0
With a dedicated Joint Power Lab and secured supply agreements, the partnership is set to drive transformative advancements in EV performance, cost-effectiveness, and the...

Audi Launches New EV Brand In China, Drops 4-Ring Logo

0
On Thursday, Audi introduced a new electric vehicle brand in China, branding the cars solely with the name 'AUDI' instead of its traditional four-ring...
IIT Bhubaneswar

IIT Bhubaneswar Partners MOSart Labs To Boost Engineering Skills In Chip Industry

0
The aim is to help students with essential skills in areas such as very-large-scale integration (VLSI), semiconductor technology, analog and digital design, validation, and...
Jaguar concept EV

JLR Highlights Its Biggest Reinvention With The Concept Car Jaguar Design Vision

0
The four-door GT is anticipated to be Jaguar's most powerful model to date. Its targeted range is approximately 430 miles (700 kilometers), and its...

ISE Labs Expands With New OSAT Facility In Mexico

0
Turbocharging its growth in North America’s tech hub, ISE Labs is set to build an OSAT semiconductor facility in Jalisco, Mexico, eyeing to create...

“Adoption Of IoT-Enabled SMT Machines Is Still In Early Phases” – Pradeep Tandon, Director...

0
While electronics are becoming smarter through the Internet of Things, is electronics manufacturing following suit? Pradeep Tandon, Director for India, Middle East, and SAARC...
Dr Yashodhan P. Gokhale, Vice President for Battery Technology, JSW Energy

Charge Forward: High-Voltage Batteries And MSMEs Can Fuel India’s EV Revolution

0
A nuanced explanation of low- and high-voltage EV batteries by Dr Gokhale, Vice President for Battery Technology at JSW Energy, illuminates their advancements and...
Sanjay Gupta, CDO & Global Head of Engineering, L&T Semiconductor Technologies

Can MSMEs Contribute And Profit From The Semicon Boom?

0
Semiconductor manufacturing often requires significant investment, typically feasible only for governments or large corporations. But are there opportunities for MSMEs as well? We spoke...
N.P. Ramesh, COO and Co-Founder, Orb Energy

“We Ensured Customers’ Monthly EMI Would Be Equal To Or Less Than Their Electricity...

0
In a conversation with Nitisha from EFY, N.P. Ramesh of Orb Energy outlines the early financing challenges customers faced. He explains how Orb Energy’s...

“Government Policy Should Equitably Address All Electric Vehicles: Extend Subsidies To Retrofits Or Remove...

0
Aryaman Raghuvanshi from EFY engages with Pramod Narendra, Head of Brand Management and Retail Network at Starya Mobility, to explore the overlooked potential of...

Wireless Light-Based Communication With Velmenni’s Technology

0
Velmenni is at the forefront of wireless communication innovation with its pioneering light-based technologies, Li-Fi and LC Link. Founded by Deepak Solanki in October 2014...

Harnessing AI Technology For Efficient Pest Management

0
AI-Genix, an agri-tech startup, is transforming pest management for farmers through advanced AI-enabled systems that precisely target harmful pests. In an industry where pesticides and...

One Charger To Charge All Your Devices

0
Now, there is no need to carry different chargers for different products. This Bhubaneswar startup has launched a universal 65W charger using GaN technology...

Karnataka Government Initiative Promises ₹5M To Tech Startups

0
Boosting innovation and entrepreneurship across the state’s vibrant ecosystem, Karnataka launched Elevate 2024 and KAN, offering grants up to ₹5 million for startups. On Tuesday,...

CastNX Tech Startup Secures ₹232M For Power Electronics Growth

0
Eyeing to boost R&D and produce 100,000 variable frequency drives by 2026, Indian power electronics startup CastNX has secured ₹232.2 million from Plutus Investments. CastNX...

Industry's Buzz

Learn From Leaders

Startups