Saturday, September 14, 2013:
In July 2013, Pico Technologies launched the PicoScope 9300 series sampling oscilloscopes, which can perform pre-compliance tests, fault-finding, design, debug and margin testing on serial communications signals such as 10GB Ethernet, SONET/SDH STM64 and FEC1071, 10x Fibre Channel, InfiniBand and PCI Express. Their small size allows you to position them right next to the device under test, minimising cable losses and removing the need for expensive active probes or pull-out sampling modules. There is even a built-in signal generator with a 4ns minimum bit interval in PRBS mode and an 8ns minimum period in pulse mode.
For further details: Vigven Tech Mark Pvt Ltd, Ph: +9180-2333-9220, [email protected], www.vigven.com
________________________________________________________________________________________
RF reference signal generator
In July 2013, Rohde & Schwarz launched R&S broadcast test centre (BTC), which provides a complete testing environment for nearly all audio, video and multimedia applications—all in a single device. The RF reference signal generator generates RF signals for all global TV and broadcasting standards and simulates transmissions. The generator can also internally analyse the audio/video functions of DUTs in real time. The reference signal generator enables users to perform complete end-to-end tests in real time over all open systems interconnection (OSI) levels. DUTs can also be integrated into fully automated test sequences.
For further details: Ph: 91-80-41780400, [email protected],
www. Rohde-Schwarz.com
________________________________________________________________________________________
A family of digital earth resistance testers
In July 2013, Minoo Impex launched its digital earth resistance tester family, the DET 1503, which is designed for testing ground wire of electric power net, as well as earth voltage test on household electric wire system and electric appliances.
The tester complies with international safety standards such as IEC 61010-1 for over voltage CAT III, 300V pollution degree 2 IEC 61010-2-031 and IEC 61557-1, 5. The tester has a measuring range of 0.00~20Ω/0.0~200Ω/0~2000Ω. It comes with a set of batteries; green, yellow, and red test wires; two grounding earth spikes, clipped wire, a manual and a nylon carry case.
For further details: Ph: +91 33 22309888, [email protected], [email protected]
________________________________________________________________________________________
A data monitoring device
In August 2013, Hanbit Automation launched the MDAD, an energy meter data monitoring and alarming device. The MDAD comes with Class-1 metering accuracy and covers the needs of a wide customer base that requires the maximum demand alerts, helping users save avoid huge penalties for exceeding their allotted load during peak hours.
The MDAD facilitates disconnection/re-connection of loads by either using a Web or mobile application, or by the simple auto scheduling of loads. It has a 200MHz high speed processor, and high immunity to EMI and ESD.
For further details: Ph: +91-40-42024433, [email protected], www.hanbitsolutions.com
________________________________________________________________________________________
Winding turns tester
In June 2013, Vasavi Electronics launched winding turns tester which is suitable for testing number of turns for wound components (air core coils) like solenoid coils, bobbin wound coils, motor coils, sensor coils, etc. With the help of this tester, turns, polarity, DC resistance can be tested in one single equipment. The tester is deigned with innovative updated microprocessor based technology to give accurate and faster results. It has four terminal measurement to avoid errors caused due to lead resistance, contact resistance and wire resistance.
For further details: Ph: +91-40-27744445, [email protected], www.vasavi.com, www.vasavi.co.in
________________________________________________________________________________________
Electronics Bazaar, South Asia’s No.1 Electronics B2B magazine
