SMT packaging taking time to pick up

- Advertisement -

Surface mount technology (SMT) packaging is a highly important part in the overall manufactur­ing process. However, India still has a long way to go in terms of reaching the advanced stage of SMT packaging. There are a number of technicali­ties involved in SMT packaging like providing power to the silicon and keeping it cool. In every package, heat plays an integral part because if heat is not adequate, temperature will slow the electrons down.

By Jesus Milton Rousseau S

Monday, November 16, 2009: “Some people say that SMT pack­aging is the tapes/stick/trays meant to put surface mount devices (SMD). But in semiconductors parlance packag­ing means attaching and wire bonding the die inside the SMD package (for example, SOIC, QFP, QFN, BGA) etc”, says Alok Gupta, director, Prosem Technology.

- Advertisement -

Different types of packaging

With new technologies evolving by the day, more challenges are being faced by designers and engineers to ensure optimum usage of packages. To achieve the highest performance, the package must be deleted and bare silicon must be used. But that will not be easy for the engineers who deal with mounting bare silicon on motherboards. The terms used for mounting bare silicon are chip-on­board (COB), flip chip and direct chip attach (DCA). Each term represents a different process. COB is used when the silicon is either wire-bonded to the board directly or is used in the form of tape-automated bonding (TAB). However, chip, wire and TAB add wire-bond inductance similar to the package. Highest performance is achieved when the bare silicon is flipped directly over and bonded to the underlying substrate. No wire bonds or leads are involved in the flip chip process.

Another innovative concept in the packaging industry has been the wafer format. Several companies have started offering devices processed and pack­aged in wafer-format. This concept involves the creation of a redistribution layer over the face of the chip. Wafer packaging can transform IC packaging from a labour-intensive process involv­ing making wire bonds one-at-a-time on individual dye, to a batch process, much like wafer fabrication.

What’s new in packaging

Novacap, a Dover company, has introduced the cap rack series of component arrays that combine a custom selection of individual ceramic components into a single surface mount package. “Com­ponents in each cap rack array can consist of highly matched multi-layer ceramic capacitors (MLCCs) and/or a combination of MLCCs with dissimilar capacitance values and dielectrics. They also can be configured to include other passive devices (ceramic resis­tors and inductors). CR assemblies are particularly suited to high-reliability ap­plications including implanted medical devices and military, aerospace, space and high-end telecom equipment,” adds Sudhakar, country manager, Ce­ramic and Microwave Products, Dover Electronics.

Key features of cap rack series include negligible cross talk, that is, components are separated by high temperature epoxy to minimise cou­pling. It offers the choice of passive component combinations, meaning the designers can choose capacitors of the same dielectric type with precise capacitance matching or capacitors of different dielectric types, as well as other passive component types (inductors, resistors). The other features are board process efficiency improvements, that are multiple component placements in a single processing step; and unique chip orientation reduces board area by uti­lising smaller chip pads compared to standard single-chip placement. And there is MIL PRF screening, an option where individual components can be screened prior to assembly.

Different packages on SMD

The most common SMD packaging available for multiple lead include small outline (SO), quad flat pack (QFP), plastic leaded chip carrier (PLCC), tape automated bonding (TAB), and leadless ceramic chip car­rier (LCCC) packaging. And the three lead configurations most commonly used with SM packages are the gull-wing, J-lead and I lead. Surface-mount components are usually smaller than their counterparts with leads and are designed to be handled by machines rather than by humans. The electron­ics industry has standardised package shapes and sizes.

But there are often subtle vari­ations in package details from manufacturer to manufacturer, and even though standard designations are used, designers need to confirm dimensions when laying out printed circuit boards.

SMD components used inSMT machines

“SMD can be split into a number of categories like passive SMDs, transis­tors and integrated circuits. A number of different packages are used for pas­sive SMDs. However, the majority of passive SMDs are either resistors or capacitors for which the package sizes are reasonably standardised. Other components including coils, crystals and others tend to have more indi­vidual requirements and hence their own packages,” says M Anil Kumar, director, SLN Technologies.

Resistor and capacitor packages have a variety of packages. These have designations that include: 1812, 1206, 0805, 0603, 0402, and 0201. In other words the 1206 measures 1200 by 600 of an inch. The larger sizes such as 1812 and 1206 were some of the first that were used. They are not widely used now as much smaller components are generally required. However, they may find use in applica­tions where larger powers are needed or where other considerations require the larger size. The connections to the PCB are made through metallised areas at either end of the package.

Transistors and diodes are often contained in a small plastic package. The connections are made via leads which emanate from the package and are bent so that they touch the board. Three leads are always used for these packages. In this way it is easy to identify which way round the device must go.

In integrated circuits, there is a va­riety of packages which are used. The package used depends upon the level of interconnectivity required. Many

chips like the simple logic chips may only require 14 or 16 pins, whereas other like the VLSI processors and as­sociated chips can require up to 200 or more. In view of the wide variation of requirements there is a number of different packages available. For the smaller chips, packages such as the small outline integrated circuit (SOIC) may be used. These are effectively the SMT version of the familiar Dual in line (DIL) packages used for the familiar 74 series logic chips. Besides, there are smaller versions including TSOP (thin small outline package) and Shrink small outline package (SSOP). The VLSI chips require a different approach. Typically a pack­age known as a quad flat pack (QFP) is used. This has a square footprint and has pins emanating on all four sides. Pins again are bent out of the package in what is termed a gull-wing formation so that they meet the board. The spacing of the pins is dependent upon the number of pins required. For some chips it may be as close as 20 thousandths of an inch. Great care is required when packaging these chips and handling them as the pins are very easily bent.

Other packages are also available. One known as a ball grid array (BGA) is used in many applications. Instead of having the connections on the side of the package, they are underneath. The connection pads have balls of solder that melt during the soldering process, thereby making a good connection with the board and mechanically attaching it. As the whole of the underside of the package can be used, the pitch of the connections is wider and it is found to be much more reliable.

How components are packaged

Today, most active components are available in surface mount. The most common is tape and reel. It requires fewer machine reloads allowing more machine run time. Trays are also used, generally for large packages such as QFP. There are standardised reel specifications for passive components and active components. “The smaller components are packaged in tape or reel forms and bigger components are packaged in trays, for example the larger ICs. Today majority of the sur­face mount components are imported from abroad,” adds Subhash Goyal, MD, Digital Circuits Pvt Ltd.

Electronics Bazaar, South Asia’s No. 1 electronics B2B sourcing magazine

- Advertisement -
Previous article
Next article

Most Popular Articles

Automotive car sensor

ISRO Chairman Urges Association With Automotive Industry To Produce Sensors Locally

0
The space research organization is making significant strides in creating indigenous car sensors to empower the automotive industry. At the Bangalore Tech Summit on November...

U.S. Approves $1.5B Subsidy For GlobalFoundries Expansion

0
Winning the $1.5 billion US government subsidy, GlobalFoundries is looking to power industries like automotive, IoT, and defence with advanced chip manufacturing in New...

Trump’s Tariff Plan Could Derange Electronics Pricing

0
From disrupting global semiconductor supply chain to inflating iPhone prices, what can Donald Trump's proposed tariff raise on Chinese imports can cause? Donald Trump,...
Chip Manifacturing-NIvidia

New Blackwell Chip Will Propel Nvidia’s Unprecedented Market Growth In Coming Years

0
These chips have effectively dispelled concerns regarding potential pullbacks from tech giants investing heavily in AI processing and data centers. The global AI backed fabless...

David Goeckeler Appointed Chair Of SIA Board

0
Bringing 40 years of tech experience to lead the global semiconductor industry, David Goeckeler, CEO of Western Digital, joins to lead the SIA Board...
Abhishek Malik from Calcom Vision Limited

“India’s Electronics Sector Is Growing Rapidly, Making This The Decade For Investors To Engage”...

0
From the complexities of manufacturing and sourcing components to testing processes that drive innovation, know all the exciting dynamics shaping this ever-evolving industry in...
Sunit Kapur, CEO of Epsilon

“Epsilon Leads With Low-Carbon Graphite Manufacturing, Outpaces Chinese Competitors” – Sunit Kapur, CEO of...

0
Are LFP cathodes and silicon-graphite anodes the best for cost efficiency in EV batteries? Sunit Kapur, CEO of Epsilon Advanced Materials, discusses this with...
John W. Mitchell, President and CEO, IPC

“India’s Core Focus On 5G, IoT, AI Fosters Need For Advanced Electronics,Components, And Semiconductors”...

0
Will Industry 4.0 supercharge India’s progress in semiconductor and electronics manufacturing? IPC President and CEO John W. Mitchell shared more strategies on the country’s...
Raman M., Co-Founder and CEO, chargeMOD

“Our Goal Is To Achieve Complete Sustainability By 2025-2026” – Raman M. Of chargeMOD

0
In a conversation with Nitisha Dubey from EFY, Raman M. of chargeMOD, elaborated his goal of developing virtual power plants by decentralising power production. Q....

“Adoption Of IoT-Enabled SMT Machines Is Still In Early Phases” – Pradeep Tandon, Director...

0
While electronics are becoming smarter through the Internet of Things, is electronics manufacturing following suit? Pradeep Tandon, Director for India, Middle East, and SAARC...
Applied Materials Representational Image

Applied Materials Selects Six Startups For Deep-Tech Accelerator Programme

0
The selected deep-tech startups will be evaluated for investment by Applied Ventures and potential collaboration opportunities with Applied Materials. In collaboration with the company's India...

Space tech Startup Akash Secures $68M CHIPS Funding

0
Eyeing to power into AI, EVs, and more high-tech industries, Akash Systems lands $68 million CHIPS grant to boost its cooling tech facility, generating...

Wireless Light-Based Communication With Velmenni’s Technology

0
Velmenni is at the forefront of wireless communication innovation with its pioneering light-based technologies, Li-Fi and LC Link. Founded by Deepak Solanki in October 2014...

Harnessing AI Technology For Efficient Pest Management

0
AI-Genix, an agri-tech startup, is transforming pest management for farmers through advanced AI-enabled systems that precisely target harmful pests. In an industry where pesticides and...

One Charger To Charge All Your Devices

0
Now, there is no need to carry different chargers for different products. This Bhubaneswar startup has launched a universal 65W charger using GaN technology...

Industry's Buzz

Learn From Leaders

Startups